Babyauto More Werdu RWF DS15 Manual De Instalación página 43

• Uninstalling the Isoclick Fix system
1. To free the Isoclick Fix anchoring, press the Isoclick Fix system
unlock buttons (21), in order to free the seat from the vehicle
ISOFIX anchoring system (fig. 12).
4.2 Fastening the seat with the vehicle's belt in a rearward-
facing installation. Group 0+/1. (Optional)
1. Make sure the 5-point harness of the safety seat has been
correctly installed (see section 3).
2. Follow the steps described in section 3.7.
3. Recline the seat fully. Pull the lever
angle of recline to position 4 without releasing the lever. Release
the lever when the seat is in the desired position (fig. 10).
4. Place the seat in the back seat of the vehicle in opposite
direction of travel (fig. 9).
5. Take out the reducer cushion (4). Pass the abdominal strap of
the seat belt through the lower seat guides
the seat. Buckle the vehicle seat belt until you hear a click (fig.
13).
6. Pass the abdominal strap of the seat through the upper guide
(16)
as shown (fig. 14/A).
7. Take up the remaining slack of the diagonal section of the 3-point
seat belt (fig. 14). and make sure it is as tight fitting as possible.
Ensure the straps are not twisted or knotted at any point.
8. Place the reducer cushion in his original place.
9. Follow the steps in section 5, securing the child with the 5-point
harness.
(15)
forward and adjust the
(11) and underneath
fig. 13
fig. 14/A
16
(16) Diagonal belt guide
(group 0+/1).
CLICK
fig. 14
43