Installing The Sensor Line(S) - VDO KIMAX Instrucciones De Uso

Installation and operating instructions
Route the compressed air lines so that:
- the permissible temperatures are not
exceeded through exposure to the ex-
haust system and other heat sources;
- they are protected against damage
from gravel, friction, trapping and con-
tact with sharp edges;
- expansion and shrinkage caused by
temperature changes does not result in
inadmissible tension or kinking of the li-
nes;
- the smallest bending radius specified
by the manufacturer is not exceeded;
- the lines cannot be damaged (e.g.
through kinking) by tilting the cab.

Installing the sensor line(s)

Fig. 7 Connecting tee connector, air pressure re-
strictor and sensor cable
© Siemens VDO Trading GmbH
Technical specifications
Ø 6 mm
To display
(sensor cable)
13