VDO KIMAX Instrucciones De Uso página 51

Installation and operating instructions
If you are installing a KIMAX axle load display
unit for trailers/semitrailers, (variants with high-
grade steel housing):
When attaching the front ring and the
glass cover, ensure that the rubber
seal is present and correctly seated on
the enclosure edge.
• Attach the front ring and the glass cover in
the display unit so that the protrusions of the
front ring mate with the grooves in the enclo-
sure edge.
• Rotate the front ring clockwise until it is firmly
seated on the display unit.
© Siemens VDO Trading GmbH
Calibration
25