Nederman VAC 20 Manual De Instrucciones página 30

EN VAC 20
Appendix A: Installation Protocol
Copy the installation protocol, fill it in and save it as a service record.
For values, note the value in the result column, otherwise a tick will suffice if the item has
been performed or considered.
NOTE! If a value is outside the limit or a result is incorrect or missing, this must be
rectified before the initial start-up and normal operation.
Unit No.
Description
Delivery checks
Missing components
Transport damage
Before installation
Foundation
Total weight
Access for maintenance (0.7 m in
front of unit)
Mounting (check availability)
Maintenance switch
Installation room, ventilation
openings
Dust collector
Duct system
Pilot-start cable (optional)
Start and control unit
Exhaust air duct directed away
from unit
Compressed air
Air lines cleaned
Air pressure
Clean and dry air
(ISO 8573-1, class 5)
Main compressed air valve
Compressed air connected to unit
30
Date:
Performed by:
Reference
'5.1 Delivery check'
'5.1 Delivery check'
'5.2.1 Location'
'Table 3-1: Technical data'
'5.2.1 Location'
'4.2 Connections'
'6.1.1 Indoor installation'
Duct collector manual
'4.2 Connections'
'4.2 Connections'
Start and control unit manual
'6.1 Installing VAC 20'
'6.1.4 Compressed air installation'
'6.1.4 Compressed air installation'
'6.1.4 Compressed air installation'
'6.1.4 Compressed air installation'
'6.1.4 Compressed air installation'
Result Notes