Nederman VAC 20 Manual De Instrucciones página 32

EN VAC 20
Appendix B: Service protocol
Copy the service protocol, fill it in and save it as a service record.
For values, note the value in the result column, otherwise a tick will suffice if the item has
been performed or considered.
NOTE! If a value is outside the limit or a result is incorrect or missing, this must be
rectified before starting normal operation again.
Unit No.
Description
Connections
Corrosion/damage
Ventilation
Belt tension
Belt replace
Pulley replace
Anti surge control
Start-up valve function
Flow restrictor function
Flow restrictor oil level
Fan bearings temperature
Fan bearings replace
Motor bearings grease
Motor bearings replace
Motor replace
32
Date:
Operating hours:
Performed by:
Reference
'8.1 General inspection'
'8.1 General inspection'
'8.1 General inspection'
'8.2 Belt transmission'
'8.2 Belt transmission'
'8.2 Belt transmission'
'7.2.4 Adjusting Anti Surge Control
by PLC' or '7.2.5 Adjusting Anti surge
control by optional adaption kit'
'7.2.4 Adjusting Anti Surge Control
by PLC' or '7.2.5 Adjusting Anti surge
control by optional adaption kit'
'8.5 Flow restrictor FR 160'
'8.5.2 Flow restrictor oil'
'8.6 Fan bearings temperature'
'8.7 Fan bearings'
'8.8 Motor bearings'
'8.8 Motor bearings'
'8.8 Motor bearings'
Result Notes