Easy Set-Up: For Uncomplicated Configuration - ABB FSM4000 Instrucciónes De Puesta En Marcha

6.3

Easy Set-up: For uncomplicated configuration

The Easy Set-up function enables users to configure the transmitter for quick and convenient
startup. For additional information about configuration options, see the operating instructions.
FSM4000
NS
NS NS
DATA STEP C/CE
ENTER
1 Magnet sensor C/CE
2 Magnet sensor DATA (> 1s = ENTER)
3 Magnet sensor STEP
Unit totalizer
m3
Qmax
50.000 l/s
Damping 1 Tau
0.22 sek
Display mode
4 small
Display 1st line
Q [Unit]
Fig. 42
D184B141U03
Press any key in the
process display, then use
STEP or DATA to scroll
to the "Easy Set-up" menu.
1
2
3
Language
English
Unit Qmax
l/s
call up the next parameter
Display 2nd line
→
Totalizer V
Display 3rd line
Totalizer
No = STEP
EASY SETUP
Yes = ENTER
Jump back to the process display
or use STEP to go to the menu level.
Within "Easy Set-up",
using the C/CE key.
Change the parameter
using the
"Enter" function.
Display 4th line
Q [m/s]
←
R
FSM4000
Parameterization
Note!
Parameters can be changed
only when the Program protection
is turned off.
Jump to menu level
"Easy Set-up" finished.
Pulse width
0.1000 ms
Pulse factor
1/m3
lout High Alarm
23.000 mA
lout Low Alarm
3.6 mA
Iout at Alarm
High Alarm
G00563
EN - 43