Warnings And Cautions - Mettler Toledo Division 2 IND570 Serie Guia De Instalacion

Warnings and Cautions


READ this manual BEFORE operating or servicing this equipment and FOLLOW these
instructions carefully.

SAVE this manual for future reference.

DO NOT allow untrained personnel to operate, clean, inspect, maintain, service or tamper with
this equipment.

ALWAYS DISCONNECT this equipment from the power source before cleaning or performing
maintenance.

CALL METTLER TOLEDO for parts, information and accessories.
METTLER TOLEDO ASSUMES NO RESPONSIBILITY FOR CORRECT INSTALLATION OF THIS
EQUIPMENT WITHIN A DIVISION 2 OR ZONE 2/22 AREA. THE INSTALLER MUST BE FAMILIAR
WITH ALL DIVISION 2 OR ZONE 2/22 WIRING AND INSTALLATION REQUIREMENTS.
THE IND570xx TERMINAL IS NOT INTRINSICALLY SAFE LEVEL "a" OR "b"! DO NOT USE
WITHIN AREAS CLASSIFIED AS HAZARDOUS DIVISION 1 OR ZONE 0/1/20/21 BECAUSE OF
COMBUSTIBLE OR EXPLOSIVE ATMOSPHERES. FAILURE TO COMPLY WITH THIS WARNING
COULD RESULT IN BODILY HARM AND/OR PROPERTY DAMAGE.
KEEP THE TERMINAL AWAY FROM PROCESSES THAT GENERATE HIGH CHARGING POTENTIAL
SUCH AS ELECTROSTATIC COATING, RAPID TRANSFER OF NON-CONDUCTIVE MATERIALS,
RAPID AIR JETS, AND HIGH PRESSURE AEROSOLS.
AVOID ELECTROSTATIC CHARGING DURING OPERATION AND MAINTENANCE.
DO NOT USE DRY CLOTH TO CLEAN THE WEIGHING TERMINAL. ALWAYS USE A DAMP CLOTH
TO CLEAN THE TERMINAL GENTLY.
USE THE WEIGHING TERMINAL ONLY WHEN ELECTROSTATIC PROCESSES LEADING TO
PROPAGATION BRUSH DISCHARGE IS IMPOSSIBLE.
OPERATION IS ONLY PERMITTED WHEN OPERATIONAL AND PROCESS-RELATED
ELECTROSTATIC CHARGES ARE NOT PRESENT.
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING