Procedures To Place W22 Vertical Mount Motors In Horizontal Position - WEG W22 Premium E3 Manual De Instalación, Operación Y Mantenimiento

www.weg.net
2. Lower the hoist fixed to motor drive end while lifting the hoist fixed to motor non-drive end until the motor
reaches its equilibrium, see Figure 4.13.
Figure 4.13 – Placing HGF motor in vertical position
3. Remove the hoist hooks from the drive end eyebolts and rotate the motor 180° to fix the removed hooks into
the two eyebolts at the motor non-drive end, see Figure 4.14.
Figure 4.14 – Lifting HGF motors by the eyebolts at the non-drive end.
4. Fix the removed hoist hooks in the other two eyebolts at the non-drive end and lift the motor until the vertical
position is reached, see Figure 4.15.
Figure 4.15 – HGF motor in the vertical position
These procedures will help you to move motors designed for vertical mounting. These procedures are also
used to place the motor from the horizontal position into the vertical position and vertical to horizontal.

4.2 Procedures to place W22 vertical mount motors in horizontal position

To place W22 vertical mount motor in horizontal position, proceed as follows:
82 Manual of Electric Motors