Festo EasyPort USB Manual De Instrucciones página 107

5. Layout and function
© Festo Didactic GmbH & Co. KG „ 721876
The EasyPort USB process interface is equipped with:
Two SysLink interfaces for reading in 8 digital input signals and
reading out 8 digital output signals.
Input 0 at each SysLink interface can also be used as a high-speed
counter input.
Sub-D socket for reading in 4 analogue input signals and reading
out 2 analogue output signals
USB 2.0 and RS 232 serial ports for connecting EasyPort USB to a PC
Two isolated screw terminals for power supply, 24 V DC
16 LEDs (green) for indicating the status of the digital inputs
16 LEDs (yellow) for indicating the status of the digital outputs
LCD panel for displaying a selected analogue signal.
The following are displayed: channel, unit of measurement, trend
and measured value (4 digits).
Two buttons for setting the analogue channel, selecting the physical
unit of measurement of the analogue value, and for setting the
address of the EasyPort USB
Not included in scope of delivery:
24 V DC power supply unit
Connecting cable for SysLink interface
Connecting cable for Sub-D socket
107