Mounting The Easyport Usb - Festo EasyPort USB Manual De Instrucciones

5. Layout and function
5.3
Mounting the
EasyPort USB
© Festo Didactic GmbH & Co. KG „ 721876
LCD panel
The input and output voltages of the selected analogue signal are
displayed in the first line as a value, and additionally in the form of a
bar graph.
Channel number and signal direction appear in the second line.
Meanings of displays: In = input signal, Out = output signal.
LED IN 0...7
Status display of the digital inputs with green LEDs
LED OUT 0...7
Status display of the digital outputs with yellow LEDs
Buttons
The analogue channel displayed on the LCD is selected with the 
button.
Possible channel numbers (Ch) for the input signal: 0...3.
Possible channel numbers (Ch) for the output signal: 0...1.
Various physical units of measurement can be selected with the 
button. The following are available: V, bar, PSI, MPa, l/min, °C.
The address setting function can be activated by pressing both of
the scroll buttons simultaneously.
The EasyPort USB module can be mounted directly on a profile plate;
the adapter is available under order number 549806.
The adapter is secured to the bottom of the EasyPort USB module with
three M4 screws.
109