Safety Precautions - Festo EasyPort USB Manual De Instrucciones

2. Safety precautions

98
98
Electrical connections may only be established and interrupted in a
de-energised state!
Use only low-voltage of up to 24 V DC at the power supply terminals,
and at the inputs and outputs of EasyPort USB.
Use EasyPort USB only in systems that automatically change to a
safe state when the power is switched off.
Use connecting cables recommended by Festo Didactic only for
electrical connections between the EasyPort USB process interface
and the process.
Also observe specifications included in the data sheets for the
connected devices and in particular all safety instructions!
© Festo Didactic GmbH & Co. KG „ 721876