Festo EasyPort USB Manual De Instrucciones página 134

8. ActiveX control for EasyPort USB
134
134
13. The SendAndGetString method also provides you with the
opportunity of transmitting commands directly from the command
interpreter to the connected EasyPort USB module.
Example: Enter the MAW1.0=FF command and then click on the
SendAndGetString button. All digital outputs at port 1 of the
EasyPort USB are set to 1.
The response from the EasyPort USB, namely AW1.0=FF, appears to
the left of the button.
14. If you want to terminate the connection to the EasyPort USB, click on
the Disconnect button.
Note
Connection with an EasyPort USB can be quickly and conveniently
established and tested with the EasyPort demo application.
© Festo Didactic GmbH & Co. KG „ 721876