Festo EasyPort USB Manual De Instrucciones página 154

9. EasyPort USB command interpreter
Command Description
MU<n>.01=xx
Assign a unit of measurement to analogue input channel 0
The unit of measurement xx is displayed for analogue input channel 0 on the LCD of the
EasyPort USB module with address <n> (<n> = 1...4).
U/M button:
xx=00: V
xx=01: bar
xx=02: PSI
xx=03: MPa
xx=04: l/min
xx=05:
MU<n>.02=xx
Assign a unit of measurement to analogue input channel 1
The unit of measurement xx is displayed for analogue input channel 1 on the LCD of the
EasyPort USB module with address <n> (<n> = 1...4).
MU<n>.04=xx
Assign a unit of measurement to analogue input channel 2
The unit of measurement xx is displayed for analogue input channel 2 on the LCD of the
EasyPort USB module with address <n> (<n> = 1...4).
MU<n>.08=xx
Assign a unit of measurement to analogue input channel 3
The unit of measurement xx is displayed for analogue input channel 3 on the LCD of the
EasyPort USB module with address <n> (<n> = 1...4).
Assigning a physical unit of measurement for display on the LCD
154
154
Please note that one physical unit of measurement cannot be converted
to another!
The MU command is used to select the physical unit of measurement.
Note
The unit of measurement assigned at the PC is overwritten if a unit of
measurement is entered directly at the EasyPort USB using the scroll
buttons.
o
C
© Festo Didactic GmbH & Co. KG „ 721876