Festo EasyPort USB Manual De Instrucciones página 114

6. Commissioning
114 114
6. If the USB drivers required for operation of the EasyPort USB have
not yet been installed to the PC, a corresponding message appears
and the new hardware wizard is started.
Do not install the USB driver by running a Windows update. If a
dialogue box with this option appears at your screen, click No.
Install the USB drivers from the included CD ROM after the dialogue
box shown below appears.
Insert the EasyPort CD ROM into the CD drive to this end. As soon as
the CD drive is ready for operation, click the Next button.
© Festo Didactic GmbH & Co. KG „ 721876