Connecting The Easyport Usb To The Pc And The Process - Festo EasyPort USB Manual De Instrucciones

5. Layout and function
5.4
Connecting the EasyPort
USB to the PC and the
process

Connecting the EasyPort USB to the PC and the process

110 110
The EasyPort USB process interface is connected to the PC via an
electrically isolated RS 232 port, or an electrically isolated USB port.
If you use the USB port for communication, connect the EasyPort
USB to the PC with the USB cable included.
If you want to use the serial port for communication, any
commercially available 9-pin serial extension cable can be used for
connection.
Various I/O data cables are available for connecting the EasyPort USB to
the actual control process.
Which I/O cable you will need depends on the control application.
© Festo Didactic GmbH & Co. KG „ 721876