Descargar Imprimir esta página

Customizing The Menus - Blackmagic Design Ultimatte 12 Manual De Instrucciones

Ocultar thumbs Ver también para Ultimatte 12:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 279

Customizing the Menus

You can change the assignment of the Smart Remote 4 control knobs and buttons in the
'configure/custom menus' settings.
To set a custom menu:
1
Go to the configure settings menu.
2
Tap the 'custom menus' button.
3
Tap on one of the 4 custom menu presets you want to set.
4
A new 'configure' button will appear just above the custom menu preset buttons.
Tap this 'configure' button. The custom menu setup dialog box will appear.
The control knob functions are in the left side column, and you can set a function from that
column to each of the 8 slots on the right side column. The 8 slots correspond to the control
knobs as follows:
Item 1 = Top left control.
Item 2 = Left second control down.
Item 3 = Left third control down.
Item 4 = Left bottom control.
Item 5 = Top right control.
Item 6 = Right second control down.
Item 7 = Right third control down.
Item 8 = Right bottom control.
To assign functions to each control knob:
1
From the 'knobs' list, scroll up and down the list of
functions and select a function from the list.
2
Press the right arrow icon in the middle column that corresponds to the desired
slot. You will see the name of the selected control appear in the blank slot.
TIP
If you change your mind and want to assign a different function to that
slot, simply press the left arrow to remove that function form the slot and
assign a different function.
3
Repeat steps 1 and 2 as you progress through all the slots to
assign your custom functions to each control knob.
4
Tap on the 'buttons' tab to assign the buttons. Follow the same
procedure as shown above to set the buttons controls.
5
When you are happy with your selections, tap 'apply'.
You will now see all your customized controls on the touchscreen.
If you are moving through other menus and want to return to your custom menus, you can
enable them by tapping 'custom menus' in the groups section, then tapping on the desired
custom menu button. You will now see all the controls and functions buttons change back to
your custom selection.
Customizing the Menus
47

Publicidad

loading