Indications In The Adjustment Mode - SICK Standard IN4000 Instrucciones De Servicio

en
Chapter 3
Note
72
Product description
3.4.2

Indications in the adjustment mode

In the adjustment mode (see section 5.3)
• the yellow signal LED flashes when the actuating
element is outside the enable zone
• the yellow signal LED extinguishes when the
actuating element is within the enable zone or in the
safe switch off range
The output remains in the safe state in the adjustment
mode.
© SICK AG • Germany • All rights reserved
Operating Instructions
IN4000 Standard
8010934/ZWG9/2018-07-26
Subject to change without notice