Surfaces / O-Rings - Sirona C1+ Manual De Instrucciones

Ocultar thumbs Ver también para C1+:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Sirona Dental Systems GmbH
7

Surfaces / O-rings

59 06 511 D 3386
D 3386.103.01.06.02
6.3 Aborting the sanitation process
Disinfecting
The surfaces (apart from upholstery) can be sprayed
and wiped with surface disinfection agents.
ATTENTION
Use only disinfecting agents which have been approved
by Sirona!
ATTENTION
If the keys on the displays are touched (if the system is
powered on) the settings can change!
Cleaning
Remove dirt and disinfectant residues regularly using a
mild, commercially-available cleaning agent.
Please do not use any colored cloths, since they may
cause discoloration of the unit surfaces, e.g. in
combination with disinfectants!
Do not allow liquids to penetrate into the ventilation slots!
Upholstery
Care of the synthetic leather upholstery must be per-
formed weekly.
Cleaning:
ATTENTION
Use only cleaning agents which have been approved by
Sirona!
Disinfection:
The upholstery must be disinfected with alcohol (50%
ethanol/water mixture).
Care of the O-rings
Use only approved lubricants (see page 2, General
Notes)
Do not use vaseline or silicone grease. They cause
damage to the O-rings!
Foot switch
Clean the bottom plate using a damp cloth.
Protection from medicaments
Due to their high concentrations and the substances
they contain, many medicaments can dissolve, etch,
bleach or discolor surfaces.
To prevent damage, wipe off medicaments immediately
with a damp cloth!
7 Surfaces / O-rings
23

Publicidad

Tabla de contenido
loading

Tabla de contenido