DJO ARTROMOT-E2 Instrucciones De Uso página 85

13. Pack the following items in the longer
box provided, again using sufficient
padding:
• Upper arm support
• Oval tube of the motion element
• Column with electronics box
• Entire forearm support with slider and
hand support
14. Pack the following items in the shorter
box provided, again using sufficient
padding:
• Star-shaped stand
• 5 legs with castors
• 5 screws to attach the legs
• 5 washers to attach the legs
• 1 Allen key
15. Please put the motion element, the
power cord and the three smaller boxes
in the respective cut-outs of the poly-
styrene block.
16. Then close the box.
Warning!
m
Shock hazard –
Allow the ARTROMOT®-E2 compact
to reach room temperature before use.
If the device has been transported at
temperatures below 0 °C (32°F), leave
it to dry at room temperature for about
2 hours, until any condensation has
disappeared.
80