DJO ARTROMOT-E2 Instrucciones De Uso página 87

6.4.2 Reconfiguration of the
ARTROMOT®-E2 compact
The ARTROMOT®-E2 compact can be used
on the left and on the right elbow joint.
However, the device must be converted
first. This is done very quickly.
1. Activate the "transport setting" function
in the menu (see also 5.3) and
start the ARTROMOT®-E2 compact.
2. Release the wheel brakes (22) and roll
the ARTROMOT®-E2 compact to the
side of the elbow to be treated.
3. Pull the pin for the swiveling movement
of the upper arm support (5) downward
and swing the support 180° towards the
inside.
Conversion diagram ARTROMOT®-E2 compact:
a b
1
82
Attention: Release the pin (5) while the
support is swinging; you will hear it lock
into place on the other side (see conver-
sion diagram a).
1
4. Open the locking screw for the swivel-
ing movement of the forearm support
(6) and swing the support with motor
B 180°. Tighten locking screw (6) (see
conversion diagram
1
5. Open the locking screw for right/left
positioning (7) two revolutions. Move
the forearm support to the lower recess
in the slot and turn it 180° in this posi-
tion. Then move the forearm support
back to the middle position (setting 0)
and tighten locking screw (7) again (see
conversion diagram
2
2
b).
c).
c