Axonics 2501 Manual Del Programador página 39

Connecting to a Stimulator
To connect to one of the "Additional Devices", press the device
2
name to select a device. Press "Connect" when it appears to
the right of the Patient ID ( 1 ) to connect to the device. The CP
will display a prompt with a progress indicator as it connects to
the patient device. The CP will automatically open the Patient
Device screen when connected to the selected device.
1
Note: The list of available devices can be updated by pressing the "EPG Scan"
or "IPG Scan button ( 2 ). Move closer to the targeted device to increase the
likelihood that the CP finds the device.
35
110-0085 rev E.indd 35 5/7/2020 11:53:31 AM