Programming The Neurostimulator - Axonics 2501 Manual Del Programador

Programming the Neurostimulator

110-0085 rev E.indd 65
To program the stimulation settings of the Neurostimulator, first:
Connect to the Neurostimulator (see manual section
•
Connecting to the Neurostimulator).
Navigate to the Programming screen from the Patient Device
•
screen by pressing "Programming" in the top right corner of
the Patient Device screen.
The Programming screen enables adjustment of the stimulation
parameters and delivery of test stimulation. Additional features
include the ability to capture programming session notes.
65
5/7/2020 11:53:49 AM