Cycle Parameters. Mma & Mma Cel Processes; Job Recording Mode; Processes With Job Recording Mode. Recorded Variables; Job Program Recording System - GALAGAR INVERMIG SYNER 230 MP Bi-PULSE Manual Técnico De Instrucciones

3.6.5. CYCLE PARAMETERS. MMA / MMA CEL PROCESSES.
PARAMETERS OF DYNAMIC CYCLE – MMA / MMA CEL PROCESS
Parameter
HOT
ARF
Lift
Anti-stiking

3.7. JOB RECORDING MODE.

3.7.1. PROCESSES WITH JOB RECORDING MODE. RECORDED VARIABLES.

Program
MANUAL
Synergic
MANUAL
Synergic
Pulsed
PULSE
Bi-Pulsed
PULSE
Pulsed
PULSE
PULSE

3.7.2. JOB PROGRAM RECORDING SYSTEM.

P4: BURN JOB

3.7.3. DELETING OF ALL JOB PROGRAMMES BY PROCESS.

P1: SELECT PROCESS
GALA INVERMIG SYNER 230 MP Bi-PULSE
Parameter description
HOT START dynamic function level
ARC FORCE dynamic function level
Dynamic functions of MMA / MMA CEL
Lift-Arc (soft striking)
Electrode anti-sticking
Variables of recording
Vh(m/min); U
Thickness synergic line e(mm); U
TPS; FDC; TBB; DIM
Vh(m/min) ; U
Thickness synergic line e(mm) ; U
Thickness synergic line e(mm); U
IE(4TS); TPS; FDC; TBB; FBP; DBP; DCL; DIM
Thickness synergic line e(mm); U
IE(4TS); TPS; FDC; TBB; FBP; DBP; DCL; DIM; REF
Thickness synergic line e(mm) ; U
TON; TOF; TPR; TPS; FDC; TBB; DIM
---
I (A); F(Hz); MOD; TPR; TPS; SL1; SL2; IB;DCL
2
2 s
JOB
SWITCH OFF THE
MACHINE
(V); L; MOD; TPR; IS(4TS); DWS(4TS); IE(4TS); TPS; FDC; TBB; DIM
2
(%); L; MOD; TPR; IS(4TS); DWS(4TS); IE(4TS);
2
(V); L; TON; TOF; TPR; TPS; FDC; TBB; DIM
2
(%); L; TON; TOF; TPR; TPS; FDC; TBB; DIM
2
(%); D; CBP; MOD; TPR; IS(4TS); DWS(4TS);
2
(%); D; CBP; MOD; TPR; IS(4TS); DWS(4TS);
2
(%); D; MOD; IS(2TS); TS(2TS); DWS(2TS);
2
E2: SELECT JOB No.
JOB
DELETE ALL PROGRAMS (keep pressed P4
during the ignition process)
Adjust.
Scale
range
% I (A) 0÷100
2
% I (A) 0÷100
2
P4: SAVE JOB
JOB
66
FACTORY
VALUE
50
50