Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ENCODER E1
ENCODER E2
3.3. WELDING PROCESS.
PROCESS
1º
MIG
2º
MIG SPOT
3º
PULSED MIG
4º
Bi-PULSED MIG
5º
PULSED MIG
SPOT WELDING
6º
MMA
7º
MMA CEL
8º
TIG
9º
TIG PULSE
3.3.1. WELDING PROCESS SELECTION SYSTEM.
MIG
1º
GALA INVERMIG SYNER 230 MP Bi-PULSE
ADJUSTMENT ENCODERS OF DIGITAL CONTROL PANEL
MIG WELDING MODE, MANUAL PROGRAM.
Welding voltage control. U
MIG WELDING MODE, SYNERGIC PROGRAM.
It enables to vary the welding voltage value assigned by synergic table. –30% ÷ +30%
PULSED TIG WELDING MODE.
Pulse frequency control F(Hz).
SETTING MODE of cycle parameters.
It enables to change the cycle variable indicated in display D2.
MIG WELDING MODE, MANUAL PROGRAM.
Wire speed control. vh
÷vh
min
MIG WELDING MODE, SYNERGIC PROGRAM.
Thickness control of piece to be welded. e
JOB REPRODUCTION MODE.
It enables to select the Nr. of JOB program to be reproduced.
JOB RECORDING MODE.
It enables to select the No. of JOB program to be recorded.
SETTING MODE of cycle parameters.
It enables to change the cycle variable indicated on display D3.
MMA/ MMA CEL/ TIG AND PULSED TIG WELDING MODE.
Welding intensity control. I
DESCRIPTION
STANDARD GMAW WELDING MODE (continuous cycle).
STANDARD GMAW SPOT WELDING MODE (spot or intermittent welding cycle)
PULSED-ARC GMAW WELDING MODE (continuous cycle).
DUAL PULSED-ARC (Bi-PULSED) GMAW WELDING MODE (continuous cycle).
PULSED GMAW SPOT WELDING MODE (spot or intermittent welding cycle)
Coated electrode welding.
Special coated electrode welding (Cellulosic type)
TIG welding with Lift-Arc striking.
TIG welding with pulsed arc and Lift-Arc striking.
PROCESSES
MIG/MAG
PULSE
MIG
MIG
SPOT
PULSE
2º
3º
÷U
. The control can be carried out during the welding process.
2min
2max
max
÷e
.
min
max
÷I
The control can be carried out during the welding process.
2min
2max..
PULSE
PULSE
PULSE
D MIG
MIG
SPOT
Bi-
PULSE
WELDI
NG
4º
5º
MMA PROCESSES
CEL
MMA
MMA
CEL
6º
7º
45
TIG PROCESSES
PULSE
TIG
TIG
PULSE
8º
9º
Publicidad
Tabla de contenido
