Adjustment System For Conventional Tig Dc Welding Mode; Adjustment System For Pulsed Tig Welding Mode; Parameters Setting Mode. Tig Processes; Adjustment System For Tig Setting Parameters - GALAGAR INVERMIG SYNER 230 MP Bi-PULSE Manual Técnico De Instrucciones

3.5.5. ADJUSTMENT SYSTEM FOR CONVENTIONAL TIG DC WELDING MODE.

3.5.6. ADJUSTMENT SYSTEM FOR PULSED TIG WELDING MODE.

P1: SELECT PROCESS
P5

3.5.7. PARAMETERS SETTING MODE. TIG PROCESSES.

PROCESS
TIG
PULSE
TIG PULSE

3.5.7.1. ADJUSTMENT SYSTEM FOR TIG SETTING PARAMETERS.

P1: SELECT PROCESS
PULSE

3.5.7.2. SETTING PARAMETERS RESET. FACTORY PARAMETERS BY PROCESS.

GALA INVERMIG SYNER 230 MP Bi-PULSE
P1: SELECT PROCESS
Note: Selection of 2T/4T is carried out in parameters setting mode.
E1: ADJUST PULSE
FREQUENCY
PULSE
Note: Selection of 2T/4T is carried out in parameters setting mode.
Gas purge. The gas solenoid valve is activated whilst depressed. The
solenoid valve activation is prolonged for two seconds after pressing.
Setting parameters
MOD; TPR; IS (4T); UPS; DWS; IE (4T); TPS; REF
FER ;SPT; T ( ) 4 EI ;SWD ;BI ;LCD ;SPU ;
P1: ENTER PARAMETERS
SETTING
SETTING PARAMETERS
PARAMETER RESET OF SELECTED PROCESS
1 s
E2: ADJUST WELDING
CURRENT I (A)
2
D3 :
A
E2: ADJUST WELDING
D2:
Hz
T ( ) 4 MOD; TPR; IS
E1: SELECT CYCLE
E2: ADJUST VALUE
PARAMETER
D2:
P1+P2:
1 s
D1:
CURRENT
D3:
A
P1: SAVE PARAMETERS
D3:
SAVED
PARAMETERS
62