Lubricant Characteristics; Lubricant Quantities - Nogueira VMN 4.0 Manual De Instrucciones

Lubricant Characteristics

HYDRAULIC OIL
GEARBOX OIL (thread blades, milling machine)
GREASE
HYDRAULIC OIL FOR LOW TEMPERATURES

Lubricant Quantities

WORN GEAR THREAD GEARBOX (PLANETARY)
WORM GEAR THREAD GEARBOX (BOX)
MILLING MACHINE GEARBOX
HYDRAULIC SYSTEM OF THE MILLING MACHINE
CAUTION:
The old oil emptied from the machine must be replaced and discarded as stated in
the local applicable regulations.
IMPORTANT:
All the maintenance procedures must be performed when the machine (wagon) is
uncoupled from the tractor and supported on a flat and solid surface with the tires
and foot base immobilized.
(The lever is latched, in the case of a jack).
CAUTION:
The appropriate accident prevention (PPEs) must be worn when performing any
maintenance and repair procedure.
Mixers Wagons VMN 4.0 / 6.0 / 8.0
AGIP OSO 46
ESSO NUTO H 46
MOBIL D T E 25
SHELL TELLUS 46
TOTAL AZZOLLA 46
PETROBRAS XP 46
AGIP BLASIA 220
ESSO SPARTAN EP 220
MOBIL GEAR 630
SHELL MACOMA R 220
TOTAL CARTER EP 220
AGIP MU 2
ARNICA 22
3,3
2,5
1,0
90
Liters
Liters
Liters
Liters
27