Operating The Machine - Nogueira VMN 4.0 Manual De Instrucciones

Operating the Machine

Final Checks before Operating
Before starting to operate the machine, check if all the components/ parts are working properly:
1) Check if all the valves on the hydraulic cylinders are opened (A fig.1) - closed (B fig.1).
2) Test the controls of the manual operations: opening the discharge door - rotation of the milling
machine - raising and lowering of the blade etc.
3) Before moving the machine, remove the base foot (fig.2).
Conclude the tests on the supplied inputs, when the machine is turned off, check for any oil leakage.
In case of any abnormalities, check if it is possible to find any possible solutions, if not, get in touch with
technical support.
opening position
18
closed position
Blade cylinder valve, on the milling
machine arm.
fig.1
Instruction Manual
Feeding
Return
fig.2
fig.4