Fig. 7:
Base plates, 2x and 3x
AVENTICS | Bus Coupler AES/Valve Driver AV, PROFINET IO | R412018140–BAL–001–AG
20
20
Valve position 1
Valve position 2
Valve position 3
12.2.2
Transition plate
The transition plate (29) has the sole function of mechanically connecting the bus coupler to the
valve zone. It is always located between the bus coupler and the first pneumatic supply plate.
Fig. 8:
Transition plate
12.2.3
Pneumatic supply plate
Pneumatic supply plates (30) can be used to divide the valve system into sections with different
pressure zones (see section 12.5 "Conversion of the valve zone" on page 105).
Fig. 9:
Pneumatic supply plate
Conversion of the Valve System
21
20 Base plate, 2x
21 Base plate, 3x
29
29
30
30
97
21
P