Valve Driver Boards - Aventics PROFINET IO Manual Del Usuario

20
Fig. 11: Blocking of base plates and valve driver boards
AVENTICS | Bus Coupler AES/Valve Driver AV, PROFINET IO | R412018140–BAL–001–AG
12.2.5

Valve driver boards

Valve drivers, which establish an electrical connection between the valves and the bus coupler,
are built into the bottom reverse side of the base plates.
The base plates' block assembly also ensures that the valve driver boards are connected via
electrical plug connections. They come together to form the "backplane", which the bus coupler uses
to control the valves.
22
37
36
 Valve position 1
 Valve position 2
 Valve position 3
 Valve position 4
The following valve driver and supply boards are present:
22
Fig. 12: Overview of the valve driver and supply boards
22 Valve driver board, 2x
23 Valve driver board, 3x
24 Valve driver board, 4x
Electrical supply plates can be used to separate the valve system into sections with different voltage
zones. For this purpose, the supply board interrupts the 24 V and the 0 V lines from UA voltage
in the backplane. A maximum of ten voltage zones are permitted.
The power supply to the electrical supply plate must be taken into account during PLC
configuration.
37 22 36
20
20 Base plate, 2x
22 Valve driver board, 2x
36 Right plug
37 Left plug
23 24
35 Electrical supply plate
38 Electrical supply board
99
Conversion of the Valve System
38
35
UA