Valve Zone; Base Plates - Aventics PROFINET IO Manual Del Usuario

96 AVENTICS | Bus Coupler AES/Valve Driver AV, PROFINET IO | R412018140–BAL–001–AG
Conversion of the Valve System
27
26
Fig. 6: Example configuration: unit consisting of AES series bus coupler and I/O modules, and AV series valves
30
29
28
34
26 Left end plate
27 I/O modules
28 Bus coupler
29 Transition plate
30 Pneumatic supply plate

12.2 Valve zone

The following figures show the components as illustrations and symbols. The symbol
representations are used in section 12.5 "Conversion of the valve zone" on page 105.
12.2.1

Base plates

The valves from the AV series are always mounted on base plates that are assembled into blocks so
that the supply pressure is applied to all valves.
The base plates are always 2x or 3x base plates for two or three single or double solenoid valves.
31
31 Valve driver (concealed)
32 Right end plate
33 Pneumatic unit, AV series
34 Electrical unit, AES series
32
33