Publicidad
Idiomas disponibles
Idiomas disponibles
Clean the dirt sieve and suction filter.
Clean the dirt sieve and suction filter:
Notice:
Clean the dirt sieve (yellow) every time you
finish cleaning.
Notice:
Clean the suction filter (yellow) every time
you finish cleaning.
Attention:
Clogged suction filters may impair the suc-
tion performance.
Clogged intake filters may reduce the
amount of cleaning solution.
Cleaning the fresh water tank filter
Notice:
Clean the fresh water tank filter after the
end of operation.
Removing and cleaning the brush
Notice:
Clean the brush whenever cleaning work
is completed.
Cleaning the machine
Attention:
The front door must be closed so as to pre-
vent splashing water from getting to the
electronics of the brush units.
Attention:
Never clean the machine with a high-pres-
sure cleaner or water jet.
Water ingress in the machine may cause
considerable damage to the mechanical or
electrical parts.
• Wipe the machine with a moist cloth.
Storing / parking the machine (not in operation)
Notice:
Store the machine with a lifted squeegee,
lifted brush and open tank lid. Thus, the
tank can dry,
and the generation of mold and unpleas-
ant odors is prevented.
Attention:
Never store the machine with discharged
batteries. Otherwise, the batteries will be
damaged beyond repair.
Service, maintenance and care
The maintenance of the machine is a prerequisite for impec-
cable operation and a long service life.
Attention:
Use original TASKI parts only; otherwise,
any warranty and liability claims will ex-
pire.
Attention:
In order to rule out unintended machine
functions, before starting maintenance
works the following must always be carried
out
- the machine must be switched off,
- the emergency stop confirmed.
Legend:
◊ = whenever cleaning is completed, ◊◊ = every week,
◊◊◊ = every month, ⊗ = service lamp
Activity
Loading batteries
Draining and cleaning the recovery and
fresh water tanks
Check the intake and suction filter for
contaminations and clean them
Check the suction hose for contamina-
tion and clean it
Clean all yellow marked parts
Clean the brushes
Clean the suction nozzle / squeegee,
check the blades for wear and change
them if necessary
Wipe the machine using a damp cloth
Clean the gasket of the tank cover,
check for cracks and replace it if neces-
sary
Check parking brake and emergency
stop button
Maintenance and service program car-
ried out by Diversey service techni-
cians
Carefully wipe the ground sensor un-
derside using a wet cloth (do not scrub
and do not use chemicals as the sensor
glass may become scratched which re-
sults in problems during detection)
EN
●
71
●
76
●
●
●
●
77
●
76
●
77
●
●
72
●
●
77
Publicidad
Capítulos
