You will find the retract/extend handle at the center of the cross tube.
Lift the retract/extend handle to adjust the overall
length of the table from 175.3 cm to 276.9 cm (69"
to 109"). Lower the handle to lock the cross tube in
position.
Instructions for use
Turn the unit on and off
1.
Make sure the flip handle is in the up and
in locked position.
2.
Plug the power cord into the table outlet
and into an applicable power outlet.
NOTE:
When the Table is plugged in, the Power indicator will
be on.
3.
Press the On/Off switch to the applicable position:
•
1 = On
•
O = Off
NOTE:
When the On/Off switch is on and the table is not plugged into a power
outlet, the table operates on battery power. Battery power is for short
term use only and should be used for emergency power situations only.
Allen® Advance Table User Guide (D-720722 Ver D)
Instructions for use
On/Off switch
21