allen A-71101-EU Manual Del Usuario página 29

20. Determine which size hip support to
use, and then do as follows to install
each support on the support top:
d. Put the support in position on the
top. Make sure the clamp side of
the support is toward the outside
of the top.
–
Thigh support—make sure
the support will be in a position to support the patient's upper
thigh area.
–
Hip support—make sure the support will be in a position that
is in between the patient's iliac crest and the top of the pelvic
bone.
e. Close the blue clamp on to the
locking posts.
f. Slide the blue clamp to the
locked position. When locked,
only the green area will show on
the pin.
NOTE:
Look under the rail to make sure the
clamp is correctly engaged on the
locking posts.
21. Install Allen® Ultra Comfort™
Covers on to the supports. Make sure
that—
•
The foam side of the cover is on
the outside.
Allen® Advance Table User Guide (D-720722 Ver D)
Instructions for use
29