Adjust The Height Of The Allen® Advance Table - allen A-71101-EU Manual Del Usuario

Instructions for use
Adjust the height of the Allen® Advance Table
WARNING:
Before you adjust the Allen® Advance Table or use the tilt feature,
make sure that the brakes are locked, the patient is secured to the
support top and is fully prepared for the movement, and the Allen®
Advance Table is free of objects that could interfere with the
adjustment. Otherwise, patient fall, injury, or equipment damage could
occur.
29. Make sure that—
•
The brakes are locked (the locked indicator on the
Allen® Advance Table display is green).
•
The patient is secured to the support top and is fully prepared for
the adjustment.
NOTE:
We recommend that you use the two large security straps to secure the
patient to the support top.
•
The Allen® Advance Table is free of objects that could interfere
with the adjustment.
WARNING:
Observe lines closely during articulations. Always use good line
management techniques. Failure to do so could cause patient fall,
injury, or equipment damage.
30. Press and hold the applicable raise or lower
control until the Allen® Advance Table is at
the correct height.
NOTE:
Near the bottom, on the outside of the
columns, there are numbers to help identify
the height level.
32 Allen® Advance Table User Guide (D-720722 Ver D)