Pre-Use Check - allen A-71101-EU Manual Del Usuario

Head Plate
26. Put the head plate in position on the
rail top at a location to support the
patient's head.
27. Attach the Velcro® straps to hold the
head plate in position.
28. Install the foam head block on to the
head plate.
NOTE:
The Allen® Head Plate is designed to work with the Allen® Foam
Head Block only.

Pre-use check

Before each use of the Allen® Advance Table, make sure all necessary
accessories are attached and the Allen® Advance Table is ready for use. If
any of the controls or indicators do not operate correctly, do not use the
Allen® Advance Table. Contact Allen Medical or your local distributor.
Condition
The Allen® Advance Table power
cord is connected to the Allen®
Advance Table and to an applicable
power outlet.
The On/Off switch is on.
The brakes are locked.
The Allen® Advance Table is in
pendant mode.
The columns are level (at the same
height).
The support top is horizontal (not
tilted).
Allen® Advance Table User Guide (D-720722 Ver D)
Associated Indicator(s)
The power indicator is on.
The battery charge level indicator is
on.
The locked indicator is green; the
unlocked indicator is off.
The pendant control indicator is
green; the manual flip indicator is
off.
Near the bottom on the outside of
the columns, there are numbers to
help identify the height level.
The tilt level indicator is green; the
tilt indicator is in the center of the
tilt indicator area.
Instructions for use
31