Level The Table And The Support Top - allen A-71101-EU Manual Del Usuario

Level the table and the support top

To determine if the Allen® Advance Table is level, look at the display:
•
The tilt level indicator will be
green.
•
The tilt indicator will be in the
center of the tilt indicator area.
WARNING:
Before you adjust the Allen® Advance Table or use the tilt feature,
make sure that the brakes are locked, the patient is secured to the
support top and is fully prepared for the movement, and the Allen®
Advance Table is free of objects that could interfere with the
adjustment. Otherwise, patient fall, injury, or equipment damage could
occur.
37. Before you adjust the Allen® Advance Table, make
sure that—
•
The brakes are locked (the locked indicator on
the Allen® Advance Table display is green).
•
The patient is secured to the support top and is fully prepared for
the adjustment.
NOTE:
We recommend that you use the two large security straps to secure the
patient to the support top.
•
The Allen® Advance Table is free of objects that could interfere
with the adjustment.
38. If the Allen® Advance Table is in a Trendelenburg position, press and
hold the opposite Trendelenburg control until the lowered column is
at the same height as the raised column and the tilt level indicator on
the display is green.
NOTE:
Near the bottom, on the outside of the
columns, there are numbers to help identify
the height level.
39. If the support top is tilted, press and hold the opposite tilt control until
the top is no longer tilted. The tilt indicator on the display should be in
the center of the tilt indicator area, and the tilt level indicator should
be green.
Allen® Advance Table User Guide (D-720722 Ver D)
Instructions for use
35