Securing Front Legs To Bottom Shelf; Connecting Wheels To Cart; Mounting Smoke Stack To Grill; Securing Smoke Stack Lid - Pit Boss PLATINUM LOCKHART PB2180LK Instrucciones Y Recetas

Use: 6 pcs screws, 6 pcs washer, and 6 pcs locking washer.
NOTE: Fasten screws of the support legs only half-way to allow easier
installation in next step.
7. SECURING BACK LEGS TO BOTTOM SHELF
Parts Required:
1 x Back Left Leg (#13)
Back Right Leg (#19)
1 x
Main Grill/Hopper Assembly (#3)
1 x
1 x Bottom Shelf (#16)
4 x Screw (#A)
4 x Washer (#D)
4 x Locking Washer (#E)
Installation:
• Mount Back Left Leg and Back Right Leg to the Bottom Shelf.
Use: 4 pcs screws, 4 pcs washer, and 4 pcs locking washer.
NOTE: Once all screws are installed, then tighten securely into the legs.
8. CONNECTING WHEELS TO THE CART
Parts Required:
Back Left Leg (#13)
1 x
Back Right Leg (#19)
1 x
1 x Front Left Leg (#15)
1 x Front Right Leg (#18)
1 x Main Grill/Hopper Assembly (#3)
2 x Locking Caster wheels (#17)
Caster Wheels (#14)
2 x
Screw (#A)
16 x
16 x Washer (#D)
16 x Locking Washer (#E)
Installation:
• Mount 2pcs Caster Wheels and 2 pcs Locking Caster Wheels to the 4 legs.
Use: 16 pcs screws, 16 pcs washer, and 16 pcs locking washer.

9. MOUNTING SMOKE STACK TO GRILL

Parts Required:
2 x Smoker Stack (#2)
1 x Main Grill/Hopper Assembly (#3)
8 x Screw (#B)
Installation:
• Mount Smoker Stack to the Grill/Hopper Assembly..
Use: 8 pcs screws.
10
7
D
E
A
8
9