Standing The Grill Upright; Attaching Screws To Side Main Chamber; Installing Side Table; Securing Side Table - Pit Boss PLATINUM LOCKHART PB2180LK Instrucciones Y Recetas

10. SECURING SMOKE STACK LID
Parts Required:
2 x Smoker Stack (#2)
2 x Smoker Stack Lid (#1)
Installation:
• Mount Smoker Stack Lid to the Smoker Stack.
NOTE: Adjust the chimney cap to affect the airflow inside the main grill.

11. STANDING THE GRILL UPRIGHT

Parts Required:
1 x Main Grill/Hopper Assembly (#3)
Locking Caster Wheels (#17)
2 x
Installation:
• Ensure all Locking Caster Wheels are locked.
• Stand the whole grill up.
IMPORTANT: Re-tighten the support leg screws to ensure they are
completely secure after positioning the grill upright.

12. ATTACHING SCREWS TO SIDE MAIN CHAMBER

Parts Required:
Main Grill/Hopper Assembly (#3)
1 x
2 x Screw (#A)
Installation:
• Attach Screws (x2) on the right side of the main chamber and leave
about 1/4" out.
Use: 2 pcs screws.
13. INSTALLING THE SIDE TABLE
Parts Required:
1 x Main Grill/Hopper Assembly (#3)
1 x Side Table (#21)
Installation:
• Hang the right Side Table onto those two screws and then push left
to seat on it.
14. SECURING THE SIDE TABLE
Parts Required:
1 x Main Grill/Hopper Assembly (#3)
1 x Side Table (#21)
Screw (#A)
3 x
Installation:
• Tighten Screws (x5) securely.
Use: 3 pcs screws.
10
11
12
5mm
13
14
11