Additional Technical Data - Hilti DSH 700 Manual Del Usuario

Weight with saw car-
riage, without cutting
disc, tank empty
Power rating
Max. rotational speed
of the cutting disc
Maximum cutting
depth

4.2 Additional technical data

Engine type
Engine speed
No-load speed
Ignition (type)
Electrode gap
Spark plug
Tightening torque for fitting the spark
plug
DSH 700/900 carburetor
DSH 700-X/900-X carburetor
Fuel mixture
Tank capacity
Cutting disc arbor size / diameter of cen-
tering bush
Cutting disc arbor size / diameter of cen-
tering bush
Minimum flange outside diameter
Max. disc thickness (steel disc thickness)
Tightening torque for fitting the cutting
disc
4.3 Noise information and vibration values determined in accordance with ISO 19432
The sound pressure and vibration values given in these instructions have been measured in accordance with
a standardized test and may be used to compare one gasoline-powered saw with another. They may be
used for a preliminary assessment of exposure.
The data given represents the main applications of the machine. However, if the machine is used for different
applications, with different accessory tools or is poorly maintained, the data may vary. This may significantly
increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the machine is switched
off, or when it is running but not actually being used for a job. This may significantly reduce exposure over
the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: Maintaining the machine and accessory tools, keeping the hands warm and organizing work
patterns.
28
DSH 700 DSH 700
30/12" / 35/14" /
DSH 700-X DSH 700-X
30/12" 35/14"
42.6 kg 42.8 kg
3.5 kW 3.5 kW
5,100 rpm 5,100 rpm
100 mm 125 mm
Single-cylinder, air-cooled two-stroke engine
9500 ± 200 rpm
2,500 rpm ... 3,000 rpm
Electronically-controlled ignition timing
0.5 mm
Manufacturer: NGK, type: CMR7A-5
12 Nm
Manufacturer: Walbro; model: WT; type: 895
Manufacturer: Walbro; model: WT; type: 1152
API-TC oil 2% (1:50)
900 cm³
20 mm
25.4 mm
102 mm
5.5 mm
25 Nm
DSH 900 DSH 900
35/14" / 40/16" /
DSH 900-X DSH 900-X
35/14" 40/16"
43.0 kg 43.2 kg
4.3 kW 4.3 kW
5,100 rpm 4,700 rpm
125 mm 150 mm