Anomalies And Solutions - De Dietrich DOR7586A Guía De Utilización

6
•

ANOMALIES AND SOLUTIONS

- «AS» is displayed (Auto Stop sys-
tem).
This function stops heating the oven if
you forget to switch it off. Turn your oven
to STOP.
- Default code starting with «F». Your
oven has detected a problem.
Stop the oven for 30 minutes. If the fault
is still there, cut off the power supply for
at least one minute.
If the fault persists, contact the Customer
Service Department.
- The oven is not heating. Check that
the oven is correctly connected and that
your installation's fuse is not out of ser-
vice. Check that the oven is not set to
«DEMO» mode (see settings menu).
- The oven light is not working.
Replace the bulb or the fuse.
Check that the oven is correctly connec-
ted.
- The cooling fan continues to ope-
rate after the oven stops. This is nor-
mal. It can work for up to one hour after
cooking to cool down the oven. If it conti-
nues beyond this, contact the Customer
Service Department.
- The pyrolysis cleaning cycle does
not begin. Verify that the door is locked.
Call the Customer Services Department
if the problem persists.
- The «door locking» symbol flashes
in the display. Door locking fault. Contact
the Customer Services Department.
- There is water on the floor of the
oven.
- The boiler is scaled. Follow the
DESCALING procedure. If the fault per-
sists, contact the After-Sales Service.
33