Filling The Encode Syringe; Aspirating Liquid - Mettler Toledo Rainin AutoRep S Manual Del Usuario

Filling the Encode Syringe

Aspirating Liquid

1.
Push the locking/filling lever to the
lower stop.
2.
Immerse the orifice of the Encode
syringe vertically into the liquid to a
depth of 3–10 mm.
3.
Raise the locking/filling lever slowly to
the upper stop to avoid the formation of
air bubbles.
Note:
Any small air bubble near the piston can
be ignored since a locking mechanism
prevents the residual volume from being
dispensed inadvertently after the final
complete dispensing step.
10
1
2
3