Install Batteries - TOUGHBUILT TB-H2-LM-165-BT Instrucciones De Funcionamiento

INSTALL BATTERIES

1. Lift the Stand-Off/Zero Point Mode tab
Pull the Battery Cover Door Latch
towards the cover and lift.
2. Insert two AAA alkaline batteries into
the battery compartment (see graphic),
observing battery polarity and location.
3. Replace battery compartment lid and push
till it clicks into position.
4. Fold Lift the Stand-Off/Zero Point Mode tab
11
over the instrument.
POWER ON AND OFF
To turn the power ON:
1. Press the Power Button
To turn the power OFF:
1. Press and hold the Power Button
2 seconds.
VIEWFINDER FEATURE
IMPORTANT! Ensure that the laser is
always pointed in a safe direction and away
from people and eyes.
To use the Viewfinder:
1. The Viewfinder feature is available in all
Measurement Modes with the exception
of Stakeout and Level, and is activated by
pressing the Viewfinder Button
2. Each mode will function as normal but will
provide a real-time camera feed of the
target area.
3. To change the Zoom Level, press the Right
Button to cycle through 1x, 2x, 3x and 4x.
4. To exit the Viewfinder and return to the
regular Measurement Mode, press the
Viewfinder Button
BATTERY AND BLUETOOTH STATUS
To view Battery status:
1. Press the Menu Button
will be displayed.
2. The Battery level will appear in the
bottom-right corner of the screen.
MODE
BLUETOOTH
UNITS
ZERO POINT
BRIGHTNESS
SOUND
LANGUAGE
MEMORY
4
.
6
.
5
. The Main Menu
11
9
4
for
6
.
.
13