TOUGHBUILT TB-H2-LM-165-BT Instrucciones De Funcionamiento página 26

blink until a measurement is taken by
laser-marking the desired target, then
pressing the Action Button
5. After the new measurement is taken, the
Active Measurement and corresponding
Icon Arrow will briefly flash yellow, then turn
white. At the bottom of the screen, the
Height 2PT. value will appear, briefly flash
yellow, then turn white. The Save Arrow
(Green, right-facing arrow) will also appear.
6. To save the Height 2PT. value, press the
Right Button
displaying that the Height 2PT.
Measurement has been saved and will be
available in the Memory Menu.
7. To take additional measurements, press
the Action Button
Measurement will be zeroed and blink,
and the other values will be cleared; then
return to step 2.
Stakeout Measurement
This mode allows the user to enter interval
distances, take an overall distance measurement,
then move the unit along the overall distance
and mark interval distances along the way.
To enter Stakeout Measurement Mode:
1. Press the Menu Button
will be displayed.
2. Use the Up Button or Down Button
highlight the Mode option.
3. Select the Mode option by pressing the
Action Button
4. Use the Up Button
26
2
. An overlay will appear
3
. The first Active
5
3
or Right Button
2
or Down Button
3 .
. The Main Menu
2
2
.
to
2
to