TOUGHBUILT TB-H2-LM-165-BT Instrucciones De Funcionamiento página 35

highlight the Mode option.
3. Select the Mode option by pressing the
Action Button
4. Use the Up Button or Down Button
highlight the Level option.
5. Select the Level Measurement Mode by
pressing the Action Button
Button
MODE
BLUETOOTH
UNITS
ZERO POINT
BRIGHTNESS
SOUND
LANGUAGE
MEMORY
To use Vertical Linear Level Measurement Mode:
1. When the unit is in a vertical orientation
+/- 45º degrees, Vertical Level Measurement
Mode will be displayed on the screen. The
level will rotate around the degree dial and
the Active Measurement is displayed in the
center of the screen. When you reach zero
degrees, the Level and dial perimeter will
turn from yellow to green.
2. To Lock the Active Measurement, press the
Action Button
+30.0°
0°
3. The Lock Icon will appear at the bottom of
the screen and the Active Measurement will
briefly flash yellow, then turn white. The
Save Arrow (Green, right-facing arrow) will
appear on the right side of the screen.
4. To save the Locked Active Measurement,
press the Right Button
appear displaying that the Level Measurement
has been saved and will be available in the
Memory Menu.
0.0°
0°
5. To Unlock the Active Measurement and
return to taking real-time measurements,
press the Action Button
3 or Right Button
2
.
3
.
0° 0°
0°
0°
3
TRAPEZOID (1)
TRAPEZOID (2)
CIRCLE AREA
CYLINDER VOLUME
LEVEL
00.0°
.0°
0°
0°
2
. An overlay will
3
.
2 .
2
to
or Right
0.0°
0° 0°
35