TOUGHBUILT TB-H2-LM-165-BT Instrucciones De Funcionamiento página 17

To use the Length Calculator:
1. The previous result will be displayed at
the top of the screen. Below this will be
the selected mathematical function, either
a plus or a minus. This function can be
changed at any point by pressing the Up
Button
active. Below the function, the Active
Measurement will blink until a measurement
is taken by laser-marking the desired target,
then pressing the Action Button
2. After the new measurement is taken, the
Active Measurement will briefly flash yellow,
then turn white. At the bottom of the
screen, the mathematical Result will briefly
flash yellow, then turn white. The Save
Arrow will also appear.
3. To save the mathematical Result, press
the Right Button
displaying that the Length Measurement
has been saved and will be available in
the Memory Menu.
4. To exit the Length Calculator and take
individual measurements, press the Action
Button
5. To add or subtract another Length
Measurement from the mathematical result,
press the Up Button
Button
AREA MEASUREMENT MODE
This mode allows the user to take Length and
Width measurements of a two-dimensional
rectangular plane and calculates the area.
To enter Area Measurement Mode:
1. Press the Menu Button
will be displayed.
2. Use the Up Button or Down Button
highlight the Mode option.
3. Select the Mode option by pressing the
Action Button
4. Use the Up Button or Down Button
highlight the Area option.
5. Select the Area Measurement Mode
by pressing the Action Button
Right Button
2
or Down Button
2
3
.
2
to subtract, and return to step 1.
Screen Display
3
or Right Button
2
.
2
, whichever is
. An overlay will appear
2
to add, or the Down
5 . The Main Menu
3
.
2
to
2
.
2
to
3
or
17