TOUGHBUILT TB-H2-LM-165-BT Instrucciones De Funcionamiento página 30

8. To save the Trapezoid (1) value, press the
Right Button
displaying that the Trapezoid (1) Measurement
has been saved and will be available in the
Memory Menu.
9. To take additional measurements, press the
Action Button
will be zeroed and blink and the other values
will be cleared; then return to step 2.
TRAPEZOID (2) MEASUREMENT
This mode allows the user to take two measurements
to define two legs of a triangle and calculates
the length and angle of the third leg-edge.
To enter Trapezoid (2) Measurement Mode:
1. Press the Menu Button
will be displayed.
2. Use the Up Button or Down Button
highlight the Mode option.
3. Select the Mode option by pressing the
Action Button
4. Use the Up Button or Down Button
highlight the Trapezoid (2) option.
5. Select the Trapezoid (2) Measurement
Mode by pressing the Action Button
Right Button.
To use Trapezoid (2) Measurement Mode:
1. The Trapezoid (2) Measurement Mode will
be displayed on the screen and the laser
will be armed as indicated by the Laser ON
Indicator
2. The first Active Measurement, a vertical leg,
and corresponding Icon Arrow will blink until
a measurement is taken by laser-marking
the desired target, then pressing the Action
Button
3. After the new measurement is taken, the
Active Measurement will briefly flash yellow,
then turn white.
30
2
. An overlay will appear
3
. The first Active Measurement
3
MODE
BLUETOOTH
UNITS
ZERO POINT
BRIGHTNESS
SOUND
LANGUAGE
MEMORY
7 .
3
.
5
. The Main Menu
or Right Button
STAKE OUT
TRAPEZOID (1)
TRAPEZOID
CIRCLE AREA
CYLINDER VOLUME
2
to
2
.
2
to
3
or
(2)
L