Maintenance And Care - TOUGHBUILT TB-H2-LM-165-BT Instrucciones De Funcionamiento

6.
Before and after each use, thoroughly
inspect the tool for possible damage.
IMPORTANT! DO NOT Use a Damaged
tool.
To ensure proper operation, please maintain
the tool as per the following instructions:
• DO NOT expose the instrument to a
freezing or extremely hot environment.
• DO NOT subject the instrument to external
compression or long-time vibration.
• Store the tool indoors, in its packing box,
when not in use.
• Keep the tool away from dusty and damp
environments.
• Use a clean, soft- and moderately moist
cloth which is soaked in clean water and
squeezed dry to wipe the tool.
• DO NOT use corrosive or volatile
substances for cleaning. Take care of
optical components (such as the laser
receiving-lens and laser beam emitting-
port) as if they were a pair of glasses or
a camera lens. Use only lint free cloth
to wipe the lens.
• DO NOT use paper towels. Optical
components can only be wiped with a
clean, soft and lint free cloth or cotton
bud which is soaked in distilled water
and then squeezed dry.
• DO NOT touch the lens of the instrument
with hands or bare fingers.
• Check battery level of the instrument
regularly. Remove the battery if the
instrument will not be used for an
extended period.
• When the battery-level icon on the
screen indicates that the battery is
low or depleted, replace with new
batteries.
• DO NOT disassemble the instrument by
yourself. Your unauthorized acts
may lead to a laser-induced injury. Any
tampering would automatically void all
applicable warranties.
• DO NOT attempt to change any optical
component installed on and attached to
the lens of the instrument.

MAINTENANCE AND CARE

43