TOUGHBUILT TB-H2-LM-165-BT Instrucciones De Funcionamiento página 36

To use Horizontal Linear Level Measurement Mode:
1. When the unit is in a horizontal orientation
+/- 45º degrees, Horizontal Level
Measurement Mode will be displayed on
the screen. The level will rotate around
the degree dial and the Active Measurement
is displayed in the center of the screen.
When you reach zero degrees, the Level and
dial perimeter will turn from yellow to green.
2. To Lock the Active Measurement, press the
Action Button
+30.0°
0°
3. The Lock Icon will appear at the bottom of
the screen and the Active Measurement will
briefly flash yellow, then turn white. The
Save Arrow (Green, right-facing arrow) will
appear on the right side of the screen.
4. To save the Locked Active Measurement,
press the Right Button
appear displaying that the Level
Measurement has been saved and will be
available in the Memory Menu.
0.0°
0°
5. To Unlock the Active Measurement and
return to taking real-time measurements,
press the Action Button
To use Bull's-eye Level Measurement Mode:
1. When the unit is laid on its back, Bull's-eye
Level Measurement Mode will be displayed
on the screen. As the unit is tilted, the
bubble will move across the degree rings
and the Active Measurement will be
displayed in the bottom-left corner of the
screen. When you reach zero degrees,
the bubble will turn from yellow to green.
If the bubble travels outside of the degree
rings, its direction will be marked by an
arrow.
2. To Lock the Active Measurement, press the
Action Button
3. The Lock Icon will appear at the bottom of
the screen and the Active Measurement will
briefly flash yellow, then turn white.
36
3
.
0° 0°
0°
3
.
0.0°
0°
2
. An overlay will
3
.
0.0°
0° 0°