TOUGHBUILT TB-H2-LM-165-BT Instrucciones De Funcionamiento página 40

will be displayed.
2. Use the Up Button or Down Button
highlight the Units option.
3. Select the Units option by pressing the
Action Button
To use the Units Menu:
1. Use the Up Button or Down Button
highlight the desired Unit Type.
2. Select the desired Unit Type by pressing
the Action Button
selected Type will briefly flash yellow, then
the Unit Precision screen will be displayed.
3. Use the Up Button or Down Button
highlight the desired Unit Precision.
4. Select the desired Unit Precision by
pressing the Action Button
Right Button
ZERO POINT MENU
The Zero Point Menu allows the user to set
the datum from which measurements will be
based.
To enter the Zero Point Menu:
1. Press the Menu Button
will be displayed.
2. Use the Up Button or Down Button
highlight the Zero Point option.
3. Select the Zero Point option by pressing
the Action Button
To use the Zero Point Menu:
1. Use the Up Button or Down Button
highlight the desired Zero Point option.
2. Select the desired Zero Point option by
pressing the Action Button
Button
the selected option will briefly flash white,
then turn yellow.
NOTE: On certain measurement screens
(if the Up and Down Arrows
below), the Zero Point can also be changed
by pressing the Up Button or Down Button
2
, cycling through the options, then pressing
the Left Button
screen.
40
3
or Right Button
2
.
2
. The yellow graphical elements of
2
3
or Right Button
3
5
. The Main Menu
3
or Right Button
3
10
to return to the previous
2
to
2
.
2
to
2
. The
2
to
or
2
to
2
.
2
to
or Right
appear as