TOUGHBUILT TB-H2-LM-165-BT Instrucciones De Funcionamiento página 31

4. Now the second Active Measurement, a leg,
and corresponding Icon Arrow will blink until
a measurement is taken by laser-marking
the desired target, then pressing the Action
Button
5. After the new measurement is taken, the
Active Measurement and corresponding
Icon Arrow will briefly flash yellow, then
turn white. At the bottom of the screen, the
Trapezoid (2) value will appear, briefly flash
yellow, then turn white. The Save Arrow
(Green, right-facing arrow) will also appear.
6. To save the Trapezoid (2) value, press the
Right Button
displaying that the Trapezoid (2) Measurement
has been saved and will be available in the
Memory Menu.
7. To take additional measurements, press
the Action Button
Measurement will be zeroed and blink
and the other values will be cleared; then
return to step 2.
CIRCLE AREA MEASUREMENT
This mode allows the user to take a distance
measurement to define a circular diameter and
calculates the area.
3
.
2
. An overlay will appear
3
. The first Active
31